RSPB
Skip navigation
Print page

Making a bird table

Bird table in Henry Doubleday wildlife garden

Image: Andy Hay

This page gives you the information you need to build a basic bird table. A bird table does not need to be fancy or complicated - the birds are only interested in a good supply of food in a safe, sheltered place.

You can download a plan to make your bird table by clicking on the link to the right.

Use wood that will not split or disintegrate when wet - exterior quality plywood from a sustainable source, 0.5 to 1 cm thick, is ideal. Any cheap piece of solid timber makes an excellent bird table. There is no maximum size, but don't make the table too small or the birds will squabble and the shyer species will be kept away: 30 x 50 cm is about right. A rim about 1 cm high around the edge will help stop food from being knocked or blown off. Leave gaps at the corners to allow rain to drain away and to make cleaning easy.

'You can download a plan to make your bird table by clicking on the link to the right.'

Before assembly, sand it smooth to remove crevices that can hold dirt and disease. It is best to leave the table untreated. If it must be treated to prolong its life, use a selected water-based preservative such as Fenceguard or Sadolin and make sure that it is dry before use.

A few nails or hooks in the edges of the table will be useful for hanging nut or seed feeders or fat balls.

A roof gives some protection to feeding birds (from rain, snow and hunting sparrowhawks). Some birds may even roost at night on a table with a roof. It also provides a dry place for seed hoppers and nut containers. A roof can, however, deter the shyer and larger species from visiting and, in most cases, an open table is really just as good.

 

What can I do?

Not quite ready to build your own bird table? Check our online shop for a wide range of bird tables specifically designed to feed your garden birds in a safe manner.

Buy a bird table from our online shop

Downloads